Publications

View citation metrics on Google Scholar and Northwestern Scholars

Dunand Group Endnote Library

Full library, including journal articles in PDF format; last updated January 31, 2018

Journal Articles

2018

Lippitz, N., Erdeniz, D., Sharp, K. W., & Dunand, D. C. (2018). Mechanical Behavior of Three-Dimensional Braided Nickel-Based Superalloys Synthesized via Pack Cementation. Metallurgical and Materials Transactions A, 49(3), 817-821.

Flores, F. U., Seidman, D. N., Dunand, D. C., & Vo, N. Q. (2018, March). Development of High-Strength and High-Electrical-Conductivity Aluminum Alloys for Power Transmission Conductors. In TMS Annual Meeting & Exhibition (pp. 247-251). Springer, Cham.

Malik, J., Nasim, W., Mansoor, B., Karaman, I., Erdeniz, D., Dunand, D. C., & Seidman, D. N. (2018, March). Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy. In TMS Annual Meeting & Exhibition (pp. 423-429). Springer, Cham.

Lass, E. A., Sauza, D. J., Dunand, D. C., & Seidman, D. N. (2018). Multicomponent γ’-strengthened Co-based superalloys with increased solvus temperatures and reduced mass densities. Acta Materialia, 147, 284-295.

Michi, R. A., Kim, G., Kim, B. W., Lee, W., & Dunand, D. C. (2018). Compressive creep behavior of hot-pressed Mg1. 96Al0. 04Si0. 97Bi0. 03. Scripta Materialia, 148, 10-14.

Zhao, J., Gong, J., Saboo, A., Dunand, D. C., & Olson, G. B. (2018). Dislocation-based modeling of long-term creep behaviors of Grade 91 steels. Acta Materialia, 149, 19-28.

De Luca A., Dunand D.C., Seidman D.N. (2018) Scandium-Enriched Nanoprecipitates in Aluminum Providing Enhanced Coarsening and Creep Resistance. In: Martin O. (eds) Light Metals 2018. TMS 2018. The Minerals, Metals & Materials Series. Springer, Cham

Taylor, S. L., Jakus, A. E., Koube, K. D., Ibeh, A. J., Geisendorfer, N. R., Shah, R. N., & Dunand, D. C. (2018). Sintering of micro-trusses created by extrusion-3D-printing of lunar regolith inks. Acta Astronautica, 143, 1-8.

Baik, S. I., Rawlings, M. J., & Dunand, D. C. (2018). Atom probe tomography study of Fe-Ni-Al-Cr-Ti ferritic steels with hierarchically-structured precipitates. Acta Materialia, 144, 707-715.

De Luca, A., Dunand, D. C., & Seidman, D. N. (2018). Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content. Acta Materialia, 144, 80-91.

Taylor, S. L., Shah, R. N., & Dunand, D. C. (2018). Ni-Mn-Ga micro-trusses via sintering of 3D-printed inks containing elemental powders. Acta Materialia, 143, 20-29.

Scotti, K. L., & Dunand, D. C. (2018). Freeze Casting–A Review of Processing, Microstructure and Properties via the Open Data Repository, FreezeCasting. net. Progress in Materials Science.

Park, H., Cho, H. H., Kim, K., Hong, K., Kim, J. H., Choe, H., & Dunand, D. C. (2018). Surface-oxidized, freeze-cast cobalt foams: Microstructure, mechanical properties and electrochemical performance. Acta Materialia, 142, 213-225.

Paz y Puente, A. P., & Dunand, D. C. (2018). Synthesis of NiTi microtubes via the Kirkendall effect during interdiffusion of Ti-coated Ni wires. Intermetallics, 92, 42-48.

2017

Tirado, F. L. R., Huang, J., & Dunand, D. C. (2017). Ice-templated silicon foams with aligned lamellar channels. MRS Communications, 7(4), 928-932.

Taylor, S. L., Shah, R. N., & Dunand, D. C. (2017). Ni-Mn-Ga Micro-trusses via Sintering of 3D-printed Inks Containing Elemental Powders. Acta Materialia.

Scotti, K. L., Northard, E. E., Plunk, A., Tappan, B. C., & Dunand, D. C. (2017). Directional solidification of aqueous TiO 2 suspensions under reduced gravity. Acta Materialia, 124, 608-619.

Röthlisberger, A., Häberli, S., Galinski, H., Dunand, D. C., & Spolenak, R. (2017). Ice-Templated W-Cu Composites with High Anisotropy. arXiv preprint arXiv:1708.06801.

Rawlings, M. J., Liebscher, C. H., Asta, M., & Dunand, D. C. (2017). Effect of titanium additions upon microstructure and properties of precipitation-strengthened Fe-Ni-Al-Cr ferritic alloys. Acta Materialia, 128, 103-112.

Plunk, A. A., & Dunand, D. C. (2017). Iron foams created by directional freeze casting of iron oxide, reduction and sintering. Materials Letters, 191, 112-115.

Paul, P. P., Paranjape, H. M., Amin-Ahmadi, B., Stebner, A. P., Dunand, D. C., & Brinson, L. C. (2017). Effect of machined feature size relative to the microstructural size on the superelastic performance in polycrystalline NiTi shape memory alloys. Materials Science and Engineering: A, 706, 227-235.

Park, H., Choi, M., Choe, H., & Dunand, D. C. (2017). Microstructure and compressive behavior of ice-templated copper foams with directional, lamellar pores. Materials Science and Engineering: A, 679, 435-445.

Park, H., Cho, H. H., Kim, K., Hong, K., Kim, J. H., Choe, H., & Dunand, D. C. (2017). Surface-oxidized, freeze-cast cobalt foams: Microstructure, mechanical properties and electrochemical performance. Acta Materialia.

Lin, J. D., Okle, P., Dunand, D. C., & Seidman, D. N. (2017). Effects of Sb micro-alloying on precipitate evolution and mechanical properties of a dilute Al-Sc-Zr alloy. Materials Science and Engineering: A, 680, 64-74.

Li, C. C., Snyder, G. J., & Dunand, D. C. (2017). Compressive creep behaviour of hot-pressed PbTe. Scripta Materialia, 134, 71-74.

Kang, J. S., Noh, Y., Kim, J., Choi, H., Jeon, T. H., Ahn, D., ... & Choi, W. (2017). Iron Oxide Photoelectrode with Multidimensional Architecture for Highly Efficient Photoelectrochemical Water Splitting. Angewandte Chemie, 129(23), 6683-6688.

Kang, J. S., Choi, H., Kim, J., Park, H., Kim, J. Y., Choi, J. W., ... & Cho, Y. H. (2017). Multidimensional Anodized Titanium Foam Photoelectrode for Efficient Utilization of Photons in Mesoscopic Solar Cells. small, 13(34).

Glazer, M. P., Wang, J., Cho, J., Almer, J. D., Okasinski, J. S., Braun, P. V., & Dunand, D. C. (2017). In operando X-ray diffraction strain measurement in Ni 3 Sn 2–Coated inverse opal nanoscaffold anodes for Li-ion batteries. Journal of Power Sources, 367, 80-89.

Erdeniz, D., Schaedler, T. A., & Dunand, D. C. (2017). Deposition-based synthesis of nickel-based superalloy microlattices. Scripta Materialia, 138, 28-31.

Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., De Luca, A., ... & Dunand, D. C. (2017). Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys. Acta Materialia, 124, 501-512.

Coakley, J., Ma, D., Frost, M., Dye, D., Seidman, D. N., Dunand, D. C., & Stone, H. J. (2017). Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted γ' microstructure. Acta Materialia.

Coakley, J., Lass, E. A., Ma, D., Frost, M., Stone, H. J., Seidman, D. N., & Dunand, D. C. (2017). Lattice parameter misfit evolution during creep of a cobalt-based superalloy single crystal with cuboidal and rafted γ' microstructures. Acta Materialia.

Coakley, J., Lass, E. A., Ma, D., Frost, M., Seidman, D. N., Dunand, D. C., & Stone, H. J. (2017). Rafting and elastoplastic deformation of superalloys studied by neutron diffraction. Scripta Materialia, 134, 110-114.

Cho, H. H., Glazer, M. P., & Dunand, D. C. (2017). Modeling of stresses and strains during (de) lithiation of Ni3Sn2-coated nickel inverse-opal anodes. ACS Applied Materials & Interfaces, 9(18), 15433-15438.

Chen-Wiegart, Y. C. K., Harder, R., Dunand, D. C., & McNulty, I. (2017). Evolution of dealloying induced strain in nanoporous gold crystals. Nanoscale, 9(17), 5686-5693.

Bocchini, P. J., Sudbrack, C. K., Sauza, D. J., Noebe, R. D., Seidman, D. N., & Dunand, D. C. (2017). Effect of Tungsten Concentration on Microstructures of Co-10Ni-6Al-(0, 2, 4, 6) W-6Ti (at.%) Cobalt-based Superalloys. Materials Science and Engineering: A.

Bocchini, P. J., Sudbrack, C. K., Noebe, R. D., Dunand, D. C., & Seidman, D. N. (2017). Effects of titanium substitutions for aluminum and tungsten in Co-10Ni-9Al-9W (at%) superalloys. Materials Science and Engineering: A, 705, 122-132.

Bocchini, P. J., Sudbrack, C. K., Noebe, R. D., Dunand, D. C., & Seidman, D. N. (2017). Microstructural and creep properties of boron-and zirconium-containing cobalt-based superalloys. Materials Science and Engineering: A, 682, 260-269.

2016

Vo, N. Q., Sorensen, J., Klier, E. M., Sanaty-Zadeh, A., Bayansan, D., Seidman, D. N., & Dunand, D. C. (2016). Development of a Precipitation-Strengthened Matrix for Non-quenchable Aluminum Metal Matrix Composites. JOM, 68(7), 1915-1924.

Vo, N. Q., Dunand, D. C., & Seidman, D. N. (2016). Role of silicon in the precipitation kinetics of dilute Al-Sc-Er-Zr alloys. Materials Science and Engineering: A, 677, 485-495.

Um, J. H., Choi, M., Park, H., Cho, Y. H., Dunand, D. C., Choe, H., & Sung, Y. E. (2016). 3D macroporous electrode and high-performance in lithium-ion batteries using SnO2 coated on Cu foam. Scientific reports, 6, 18626.

Taylor, S. L., Jakus, A. E., Shah, R. N., & Dunand, D. C. (2016). Iron and Nickel Cellular Structures by Sintering of 3D-Printed Oxide or Metallic Particle Inks. Advanced Engineering Materials.

Sauza, D. J., Bocchini, P. J., Dunand, D. C., & Seidman, D. N. (2016). Influence of ruthenium on microstructural evolution in a model Co Al W superalloy. Acta Materialia, 117, 135-145.

Röthlisberger, A., Häberli, S., Spolenak, R., & Dunand, D. C. (2016). Synthesis, structure and mechanical properties of ice-templated tungsten foams. Journal of Materials Research, 31(6), 753-764.

Paz y Puente, A. P., Erdeniz, D., Fife, J. L., & Dunand, D. C. (2016). In situ X-ray tomographic microscopy of Kirkendall pore formation and evolution during homogenization of pack-aluminized Ni–Cr wires. Acta Materialia, 103, 534-546.

Park, H., Kim, K., Cho, H., Kim, J. H., Dunand, D. C., & Choe, H. (2016, June). Integral-Type Porous Cobalt@ Cobalt Oxide Anode with Micro/Nano-Sized Pores for Lithium-Ion Battery. In Meeting Abstracts (No. 2, pp. 375-375). The Electrochemical Society. (link)

Liu, Q., Coakley, J., Seidman, D. N., & Dunand, D. C. (2016). Precipitate evolution and creep behavior of a W-free Co-based superalloy. Metallurgical and Materials Transactions A, 47(12), 6090-6096.

Jo, H., Kim, M. J., Choi, H., Sung, Y. E., Choe, H., & Dunand, D. C. (2016). Morphological study of directionally freeze-cast nickel foams. Metallurgical and Materials Transactions E, 3(1), 46-54.

De Luca, A., Dunand, D. C., & Seidman, D. N. (2016). Mechanical properties and optimization of the aging of a dilute Al-Sc-Er-Zr-Si alloy with a high Zr/Sc ratio. Acta Materialia, 119, 35-42.

Cho, H. H., Glazer, M. P., Xu, Q., Han, H. N., & Dunand, D. C. (2016). Numerical and experimental investigation of (de) lithiation-induced strains in bicontinuous silicon-coated nickel inverse opal anodes. Acta Materialia, 107, 289-297.

Cho, H. H., Chen-Wiegart, Y. C. K., & Dunand, D. C. (2016). Finite element analysis of mechanical stability of coarsened nanoporous gold. Scripta Materialia, 115, 96-99.

Bewerse, C., Brinson, L. C., & Dunand, D. C. (2016). Porous shape-memory NiTi-Nb with microchannel arrays. Acta Materialia, 115, 83-93.

2015

Zheng, P., Kucza, N. J., Wang, Z., Müllner, P., & Dunand, D. C. (2015). Effect of directional solidification on texture and magnetic-field-induced strain in Ni–Mn–Ga foams with coarse grains. Acta Materialia, 86, 95-101.

Zheng, P., Kucza, N. J., Patrick, C. L., Müllner, P., & Dunand, D. C. (2015). Mechanical and magnetic behavior of oligocrystalline Ni–Mn–Ga microwires. Journal of Alloys and Compounds, 624, 226-233.

Yuan, B., Zheng, P., Gao, Y., Zhu, M., & Dunand, D. C. (2015). Effect of directional solidification and porosity upon the superelasticity of Cu–Al–Ni shape-memory alloys. Materials & Design, 80, 28-35.

Young, M. L., & Dunand, D. C. (2015). Comparing Compositions of Modern Cast Bronze Sculptures: Optical Emission Spectroscopy Versus x-Ray Fluorescence Spectroscopy. JOM, 67(7), 1646-1658. doi:10.1007/s11837-015-1445-1

Witherspoon, C., Zheng, P., Chmielus, M., Dunand, D. C., & Mullner, P. (2015). Effect of porosity on the magneto-mechanical behavior of polycrystalline magnetic shape-memory Ni-Mn-Ga foams. Acta Materialia, 92, 64-71. doi:10.1016/j.actamat.2015.03.038

Wang, Z. L., Zheng, P., Nie, Z. H., Ren, Y., Wang, Y. D., Mullner, P., & Dunand, D. C. (2015). Superelasticity by reversible variants reorientation in a Ni-Mn-Ga microwire with bamboo grains. Acta Materialia, 99, 373-381. doi:10.1016/j.actamat.2015.08.002

Wang, L. Q., Wang, C., & Dunand, D. C. (2015). Microstructure and Strength of NiTi-Nb Eutectic Braze Joining NiTi Wires. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 46A(4), 1433-1436. doi:10.1007/s11661-015-2781-z

Wang, C., & Dunand, D. C. (2015b). Nanoscale Cellular Structures at Phase Boundaries of Ni-Cr-Al-Ti and Ni-Cr-Mo-Al-Ti Superalloys. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 46A(6), 2680-2687. doi:10.1007/s11661-015-2831-6

Wang, C., & Dunand, D. C. (2015a). Microstructure Evolution During Al, Ti, and Mo Surface Deposition and Volume Diffusion in Ni-20Cr Wires and Woven Structures. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 46A(5), 2249-2254. doi:10.1007/s11661-015-2794-7

Song, G., Sun, Z. Q., Li, L., Xu, X. D., Rawlings, M., Liebscher, C. H., . . . Liaw, P. K. (2015). Ferritic Alloys with Extreme Creep Resistance via Coherent Hierarchical Precipitates. Scientific Reports, 5, 14. doi:10.1038/srep16327

Sepulveda, R., Plunk, A. A., & Dunand, D. C. (2015). Microstructure of Fe2O3 scaffolds created by freeze-casting and sintering. Materials Letters, 142, 56-59. doi:10.1016/j.matlet.2014.11.155

Philippe, T., Erdeniz, D., Dunand, D. C., & Voorhees, P. W. (2015). A phase-field study of the aluminizing of nickel. Philosophical Magazine, 95(9), 935-947. doi:10.1080/14786435.2015.1010622

Liebscher, C. H., Radmilovic, V. R., Dahmen, U., Vo, N. Q., Dunand, D. C., Asta, M., & Ghosh, G. (2015). A hierarchical microstructure due to chemical ordering in the bcc lattice: Early stages of formation in a ferritic Fe-Al-Cr-Ni-Ti alloy. Acta Materialia, 92, 220-232. doi:10.1016/j.actamat.2015.03.043

Kucza, N. J., Patrick, C. L., Dunand, D. C., & Mullner, P. (2015). Magnetic-field-induced bending and straining of Ni-Mn-Ga single crystal beams with high aspect ratios. Acta Materialia, 95, 284-290. doi:10.1016/j.actamat.2015.05.030

Jakus, A. E., Taylor, S. L., Geisendorfer, N. R., Dunand, D. C., & Shah, R. N. (2015). Metallic Architectures from 3D-Printed Powder-Based Liquid Inks. Advanced Functional Materials, 25(45), 6985-6995. doi:10.1002/adfm.201503921

Glazer, M. P. B., Cho, J., Almer, J., Okasinski, J., Braun, P. V., & Dunand, D. C. (2015). In Operando Strain Measurement of Bicontinuous Silicon-Coated Nickel Inverse Opal Anodes for Li-Ion Batteries. Advanced Energy Materials, 5(14), 10. doi:10.1002/aenm.201500466

Erdeniz, D., Sharp, K. W., & Dunand, D. C. (2015). Transient liquid-phase bonded 3D woven Ni-based superalloys. Scripta Materialia, 108, 60-63. doi:10.1016/j.scriptamat.2015.06.016

Erdeniz, D., Levinson, A. J., Sharp, K. W., Rowenhorst, D. J., Fonda, R. W., & Dunand, D. C. (2015). Pack Aluminization Synthesis of Superalloy 3D Woven and 3D Braided Structures. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 46A(1), 426-438. doi:10.1007/s11661-014-2602-9

Bewerse, C., Emery, A. A., Brinson, L. C., & Dunand, D. C. (2015). NiTi porous structure with 3D interconnected microchannels using steel wire spaceholders. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 634, 153-160. doi:10.1016/j.msea.2014.12.088

Bewerse, C., Brinson, L. C., & Dunand, D. C. (2015). Microstructure and mechanical properties of as-cast quasibinary NiTi-Nb eutectic alloy. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 627, 360-368. doi:10.1016/j.msea.2014.12.090

2014

Zheng, P. Q., Lindquist, P., Yuan, B., Mullner, P., & Dunand, D. C. (2014). Fabricating Ni-Mn-Ga microtubes by diffusion of Mn and Ga into Ni tubes. Intermetallics, 49, 70-80. doi:10.1016/j.intermet.2014.01.014

Zhao, L. Y., Ha, S., Sharp, K. W., Geltmacher, A. B., Fonda, R. W., Kinsey, A. H., . . . Weihs, T. P. (2014). Permeability measurements and modeling of topology-optimized metallic 3-D woven lattices. Acta Materialia, 81, 326-336. doi:10.1016/j.actamat.2014.08.037

Wang, C., & Dunand, D. C. (2014). Concurrent Growth of Kirkendall Pores and Vapor-Solid-Solid Protuberances on Ni Wires During Mo Vapor-Phase Deposition. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 45A(13), 6252-6259. doi:10.1007/s11661-014-2587-4

Vo, N. Q., Liebscher, C. H., Rawlings, M. J. S., Asta, M., & Dunand, D. C. (2014). Creep properties and microstructure of a precipitation-strengthened ferritic Fe-Al-Ni-Cr alloy. Acta Materialia, 71, 89-99. doi:10.1016/j.actamat.2014.02.020

Vo, N. Q., Dunand, D. C., & Seidman, D. N. (2014). Improving aging and creep resistance in a dilute Al-Sc alloy by microalloying with Si, Zr and Er. Acta Materialia, 63, 73-85. doi:10.1016/j.actamat.2013.10.008

Um, J. H., Park, H., Cho, Y. H., Glazer, M. P. B., Dunand, D. C., Choe, H., & Sung, Y. E. (2014). 3D interconnected SnO2-coated Cu foam as a high-performance anode for lithium-ion battery applications. RSC Advances, 4(101), 58059-58063. doi:10.1039/c4ra12297f

Singhal, A., Stock, S. R., Almer, J. D., & Dunand, D. C. (2014). Effect of cyclic loading on the nanoscale deformation of hydroxyapatite and collagen fibrils in bovine bone. Biomechanics and Modeling in Mechanobiology, 13(3), 615-626. doi:10.1007/s10237-013-0522-z

Scott, J. A., & Dunand, D. C. (2014). Effect of Oxidation on Creep Strength and Resistivity of Porous Fe-26Cr-1Mo. Metallurgical and Materials Transactions E, 1(4), 303-310.

Krug, M. E., Mao, Z. G., Seidman, D. N., & Dunand, D. C. (2014). Comparison between dislocation dynamics model predictions and experiments in precipitation-strengthened Al-Li-Sc alloys. Acta Materialia, 79, 382-395. doi:10.1016/j.actamat.2014.06.038

Erdeniz, D., & Dunand, D. C. (2014). Microstructure development during pack aluminization of nickel and nickel-chromium wires. Intermetallics, 50, 43-53. doi:10.1016/j.intermet.2014.02.009

Bewerse, C., Brinson, L. C., & Dunand, D. C. (2014). NiTi with 3D-interconnected microchannels produced by liquid phase sintering and electrochemical dissolution of steel tubes. Journal of Materials Processing Technology, 214(9), 1895-1899. doi:10.1016/j.jmatprotec.2014.04.006

2013

Bocchini, P. J., Lass, E. A., Moon, K. W., Williams, M. E., Campbell, C. E., Kattner, U. R., . . . Seidman, D. N. (2013). Atom-probe tomographic study of gamma/gamma ' interfaces and compositions in an aged Co-Al-W superalloy. Scripta Materialia, 68(8), 563-566. doi:10.1016/j.scriptamat.2012.11.035

Chen-Wiegart, Y. C. K., Wada, T., Butakov, N., Xiao, X. H., De Carlo, F., Kato, H., . . . Maire, E. (2013). 3D morphological evolution of porous titanium by x-ray micro- and nano-tomography. Journal of Materials Research, 28(17), 2444-2452. doi:10.1557/jmr.2013.151

Chen-Wiegart, Y. C. K., Wang, S., Lee, W. K., McNulty, I., Voorhees, P. W., & Dunand, D. C. (2013). In situ imaging of dealloying during nanoporous gold formation by transmission X-ray microscopy. Acta Materialia, 61(4), 1118-1125. doi:10.1016/j.actamat.2012.10.017

Chen-Wiegart, Y. C. K., Wang, S., McNulty, I., & Dunand, D. C. (2013). Effect of Ag-Au composition and acid concentration on dealloying front velocity and cracking during nanoporous gold formation. Acta Materialia, 61(15), 5561-5570. doi:10.1016/j.actamat.2013.05.039

Colombo, P., Dunand, D. C., & Kumar, V. (2013). Porous materials: Less is more. Journal of Materials Research, 28(17), 2187-2190. doi:10.1557/jmr.2013.232

Cox, M. E., & Dunand, D. C. (2013a). Acoustic Emission Analysis of Damage during Compressive Deformation of Amorphous Zr-Based Foams with Aligned, Elongated Pores. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 44A(7), 3114-3122. doi:10.1007/s11661-013-1691-1

Cox, M. E., & Dunand, D. C. (2013b). Anisotropic mechanical properties of amorphous Zr-based foams with aligned, elongated pores. Acta Materialia, 61(16), 5937-5948. doi:10.1016/j.actamat.2013.06.028

Deymier-Back, A. C., Singhal, A., Yuan, F., Almer, J. D., Brinson, L. C., & Dunand, D. C. (2013). Effect of high-energy X-ray irradiation on creep mechanisms in bone and dentin. Journal of the Mechanical Behavior of Biomedical Materials, 21, 17-31. doi:10.1016/j.jmbbm.2013.01.016

Deymier-Black, A. C., Singhal, A., Almer, J. D., & Dunand, D. C. (2013). Effect of X-ray irradiation on the elastic strain evolution in the mineral phase of bovine bone under creep and load-free conditions. Acta Biomaterialia, 9(2), 5305-5312. doi:10.1016/j.actbio.2012.07.046

Guan, Z. P., & Dunand, D. C. (2013). Compressive creep behavior of cast Bi2Te3. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 565, 321-325. doi:10.1016/j.msea.2012.12.052

Hamilton, B., Oppenheimer, S., Dunand, D. C., & Lewis, D. (2013). Diffusion Bonding of Ti-6Al-4V Sheet with Ti-6Al-4V Foam for Biomedical Implant Applications. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 44(6), 1554-1559. doi:10.1007/s11663-013-9942-5

Scott, J. A., & Dunand, D. C. (2013). Metallic sandwiches with open porosity facings and closed porosity cores for SOFC interconnects. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 585, 32-38. doi:10.1016/j.msea.2013.06.086

Singhal, A., Deymier-Black, A. C., Almer, J. D., & Dunand, D. C. (2013). Effect of stress and temperature on the micromechanics of creep in highly irradiated bone and dentin. Materials Science & Engineering C-Materials for Biological Applications, 33(3), 1467-1475. doi:10.1016/j.msec.2012.12.069

Singhal, A., Yuan, F., Stock, S. R., Almer, J. D., Brinson, L. C., & Dunand, D. C. (2013). Evolution of Phase Strains During Tensile Loading of Bovine Cortical Bone. Advanced Engineering Materials, 15(4), 238-249. doi:10.1002/adem.201200204

Witherspoon, C., Zheng, P. Q., Chmielus, M., Vogel, S. C., Dunand, D. C., & Mullner, P. (2013). Texture and training of magnetic shape memory foam. Acta Materialia, 61(6), 2113-2120. doi:10.1016/j.actamat.2012.12.032

Ye, B., Matsen, M. R., & Dunand, D. C. (2013). Enhanced densification of Ti-6Al-4V/TiC powder blends by transformation mismatch plasticity. Journal of Materials Research, 28(17), 2520-2527. doi:10.1557/jmr.2013.95

2012

Booth-Morrison, C., Mao, Z., Diaz, M., Dunand, D. C., Wolverton, C., & Seidman, D. N. (2012). Role of silicon in accelerating the nucleation of Al-3(Sc,Zr) precipitates in dilute Al-Sc-Zr alloys. Acta Materialia, 60(12), 4740-4752. doi:10.1016/j.actamat.2012.05.036

Booth-Morrison, C., Seidman, D. N., & Dunand, D. C. (2012). Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al-Zr-Sc-Si alloys. Acta Materialia, 60(8), 3643-3654. doi:10.1016/j.actamat.2012.02.030

Chen-Wiegart, Y. C. K., Wang, S., Chu, Y. S., Liu, W. J., McNulty, I., Voorhees, P. W., & Dunand, D. C. (2012). Structural evolution of nanoporous gold during thermal coarsening. Acta Materialia, 60(12), 4972-4981. doi:10.1016/j.actamat.2012.05.012

Cox, M. E., Kecskes, L. J., Mathaudhu, S. N., & Dunand, D. C. (2012). Amorphous Hf-based foams with aligned, elongated pores. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 533, 124-127. doi:10.1016/j.msea.2011.11.032

DeFouw, J. D., & Dunand, D. C. (2012). Processing and compressive creep of cast replicated IN792 Ni-base superalloy foams. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 558, 129-133. doi:10.1016/j.msea.2012.07.099

Deymier-Black, A. C., Almer, J. D., Stock, S. R., & Dunand, D. C. (2012). Variability in the elastic properties of bovine dentin at multiple length scales. Journal of the Mechanical Behavior of Biomedical Materials, 5(1), 71-81. doi:10.1016/j.jmbbm.2011.08.005

Deymier-Black, A. C., Yuan, F., Singhal, A., Almer, J. D., Brinson, L. C., & Dunand, D. C. (2012). Evolution of load transfer between hydroxyapatite and collagen during creep deformation of bone. Acta Biomaterialia, 8(1), 253-261. doi:10.1016/j.actbio.2011.08.014

Krug, M. E., Seidman, D. N., & Dunand, D. C. (2012). Creep properties and precipitate evolution in Al-Li alloys microalloyed with Sc and Yb. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 550, 300-311. doi:10.1016/j.msea.2012.04.075

Ramos, A. I. C., & Dunand, D. C. (2012a). Preparation and Characterization of Directionally Freeze-cast Copper Foams. Metals, 2(3), 265-273. doi:10.3390/met2030265

Singhal, A., Almer, J. D., & Dunand, D. C. (2012). Variability in the nanoscale deformation of hydroxyapatite during compressive loading in bovine bone. Acta Biomaterialia, 8(7), 2747-2758. doi:10.1016/j.actbio.2012.03.036

Vo, N. Q., Dunand, D. C., & Seidman, D. N. (2012). Atom probe tomographic study of a friction-stir-processed Al-Mg-Sc alloy. Acta Materialia, 60(20), 7078-7089. doi:10.1016/j.actamat.2012.09.015

Ye, B., Matsen, M. R., & Dunand, D. C. (2012). Finite-Element Modeling of Titanium Powder Densification. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 43A(1), 381-390. doi:10.1007/s11661-011-0839-0

Young, M. L., DeFouw, J. D., Frenzel, J., & Dunand, D. C. (2012). Cast-Replicated NiTiCu Foams with Superelastic Properties. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 43A(8), 2939-2944. doi:10.1007/s11661-011-1060

2011

Bansiddhi, A., & Dunand, D. C. (2011a). Niobium Wires as Space Holder and Sintering Aid for Porous NiTi. Advanced Engineering Materials, 13(4), 301-305. doi:10.1002/adem.201000241

Bansiddhi, A., & Dunand, D. C. (2011b). Processing of NiTi Foams by Transient Liquid Phase Sintering. Journal of Materials Engineering and Performance, 20(4-5), 511-516. doi:10.1007/s11665-010-9827-6

Booth-Morrison, C., Dunand, D. C., & Seidman, D. N. (2011). Coarsening resistance at 400 degrees C of precipitation-strengthened Al-Zr-Sc-Er alloys. Acta Materialia, 59(18), 7029-7042. doi:10.1016/j.actamat.2011.07.057

Brothers, A. H., Mangrich, B., Cox, M., & Dunand, D. C. (2011). Effect of crystalline metallic particles on the compressive behavior of a cellular amorphous metal. Scripta Materialia, 64(11), 1031-1034. doi:10.1016/j.scriptamat.2011.02.014

Chastain, M. L., Deymier-Black, A. C., Kelly, J. E., Brown, J. A., & Dunand, D. C. (2011). Metallurgical analysis of copper artifacts from Cahokia. Journal of Archaeological Science, 38(7), 1727-1736. doi:10.1016/j.jas.2011.03.004

Cox, M. E., & Dunand, D. C. (2011). Bulk gold with hierarchical macro-, micro- and nano-porosity. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 528(6), 2401-2406. doi:10.1016/j.msea.2010.11.072

Deymier-Black, A. C., Almer, J. D., Haeffner, D. R., & Dunand, D. C. (2011). Effect of freeze-thaw cycles on load transfer between the biomineral and collagen phases in bovine dentin. Materials Science & Engineering C-Materials for Biological Applications, 31(7), 1423-1428. doi:10.1016/j.msec.2011.05.011

Dunand, D. C., & Mullner, P. (2011). Size Effects on Magnetic Actuation in Ni-Mn-Ga Shape-Memory Alloys. Advanced Materials, 23(2), 216-232. doi:10.1002/adma.201002753

Hong, E., Ahn, B. Y., Shoji, D., Lewis, J. A., & Dunand, D. C. (2011). Microstructure and Mechanical Properties of Reticulated Titanium Scrolls. Advanced Engineering Materials, 13(12), 1122-1127. doi:10.1002/adem.201100082

Jorgensen, D. J., & Dunand, D. C. (2011). Structure and mechanical properties of Ti-6Al-4V with a replicated network of elongated pores. Acta Materialia, 59(2), 640-650. doi:10.1016/j.actamat.2010.09.069

Krug, M. E., & Dunand, D. C. (2011). Modeling the creep threshold stress due to climb of a dislocation in the stress field of a misfitting precipitate. Acta Materialia, 59(13), 5125-5134. doi:10.1016/j.actamat.2011.04.044

Krug, M. E., Dunand, D. C., & Seidman, D. N. (2011). Effects of Li additions on precipitation-strengthened Al-Sc and Al-Sc-Yb alloys. Acta Materialia, 59(4), 1700-1715. doi:10.1016/j.actamat.2010.11.037

Li, J. C., & Dunand, D. C. (2011). Mechanical properties of directionally freeze-cast titanium foams. Acta Materialia, 59(1), 146-158. doi:10.1016/j.actamat.2010.09.019

Monachon, C., Krug, M. E., Seidman, D. N., & Dunand, D. C. (2011). Chemistry and structure of core/double-shell nanoscale precipitates in Al-6.5Li-0.07Sc-0.02Yb (at.%). Acta Materialia, 59(9), 3398-3409. doi:10.1016/j.actamat.2011.02.015

Neurohr, A. J., & Dunand, D. C. (2011a). Mechanical anisotropy of shape-memory NiTi with two-dimensional networks of micro-channels. Acta Materialia, 59(11), 4616-4630. doi:10.1016/j.actamat.2011.04.007

Neurohr, A. J., & Dunand, D. C. (2011b). Shape-memory NiTi with two-dimensional networks of micro-channels. Acta Biomaterialia, 7(4), 1862-1872. doi:10.1016/j.actbio.2010.11.038

Robertson, I. M., Schuh, C. A., Vetrano, J. S., Browning, N. D., Field, D. P., Jensen, D. J., . . . Was, G. (2011). Towards an integrated materials characterization toolbox. Journal of Materials Research, 26(11), 1341-1383. doi:10.1557/jmr.2011.41

Sasso, C. P., Zheng, P. Q., Basso, V., Mullner, P., & Dunand, D. C. (2011). Enhanced field induced martensitic phase transition and magnetocaloric effect in Ni55Mn20Ga25 metallic foams. Intermetallics, 19(7), 952-956. doi:10.1016/j.intermet.2011.02.015

Singhal, A., Deymier-Black, A. C., Almer, J. D., & Dunand, D. C. (2011). Effect of high-energy X-ray doses on bone elastic properties and residual strains. Journal of the Mechanical Behavior of Biomedical Materials, 4(8), 1774-1786. doi:10.1016/j.jmbbm.2011.05.035

Van Dalen, M. E., Dunand, D. C., & Seidman, D. N. (2011). Microstructural evolution and creep properties of precipitation-strengthened Al-0.06Sc-0.02Gd and Al-0.06Sc-0.02Yb (at.%) alloys. Acta Materialia, 59(13), 5224-5237. doi:10.1016/j.actamat.2011.04.059

van Dalen, M. E., Gyger, T., Dunand, D. C., & Seidman, D. N. (2011). Effects of Yb and Zr microalloying additions on the microstructure and mechanical properties of dilute Al-Sc alloys. Acta Materialia, 59(20), 7615-7626. doi:10.1016/j.actamat.2011.09.019

Ye, B., Matsen, M. R., & Dunand, D. C. (2011). Blended elemental powder densification of Ti-6Al-4V by hot pressing. Journal of Materials Research, 26(8), 965-969. doi:10.1557/jmr.2011.26

Yuan, F., Stock, S. R., Haeffner, D. R., Almer, J. D., Dunand, D. C., & Brinson, L. C. (2011). A new model to simulate the elastic properties of mineralized collagen fibril. Biomechanics and Modeling in Mechanobiology, 10(2), 147-160. doi:10.1007/s10237-010-0223-9

Zhang, X. X., Witherspoon, C., Mullner, P., & Dunand, D. C. (2011). Effect of pore architecture on magnetic-field-induced strain in polycrystalline Ni-Mn-Ga. Acta Materialia, 59(5), 2229-2239. doi:10.1016/j.actamat.2010.12.026

2010

Ahn, B. Y., Shoji, D., Hansen, C. J., Hong, E., Dunand, D. C., & Lewis, J. A. (2010). Printed Origami Structures. Advanced Materials, 22(20), 2251-+. doi:10.1002/adma.200904232

Beeri, O., Dunand, D. C., & Seidman, D. N. (2010). Roles of impurities on precipitation kinetics of dilute Al-Sc alloys. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 527(15), 3501-3509. doi:10.1016/j.msea.2010.02.027

Chen, Y. C. K., Chu, Y. S., Yi, J., McNulty, I., Shen, Q., Voorhees, P. W., & Dunand, D. C. (2010). Morphological and topological analysis of coarsened nanoporous gold by x-ray nanotomography. Applied Physics Letters, 96(4), 3. doi:10.1063/1.3285175

Chmielus, M., Witherspoon, C., Wimpory, R. C., Paulke, A., Hilger, A., Zhang, X. X., . . . Mullner, P. (2010). Magnetic-field-induced recovery strain in polycrystalline Ni-Mn-Ga foam. Journal of Applied Physics, 108(12), 7. doi:10.1063/1.3524503

Cox, M. E., Mathaudhu, S. N., Hartwig, K. T., & Dunand, D. C. (2010). Amorphous Zr-Based Foams with Aligned, Elongated Pores. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 41A(7), 1706-1713. doi:10.1007/s11661-009-0039-3

DeFouw, J. D., & Dunand, D. C. (2010). Effect of processing variables on the reaction kinetics of MgB2 fibers. Physica C-Superconductivity and Its Applications, 470(15-16), 648-653. doi:10.1016/j.physc.2010.06.007

Deymier-Black, A. C., Almer, J. D., Stock, S. R., Haeffner, D. R., & Dunand, D. C. (2010). Synchrotron X-ray diffraction study of load partitioning during elastic deformation of bovine dentin. Acta Biomaterialia, 6(6), 2172-2180. doi:10.1016/j.actbio.2009.11.017

Hong, E., Dunand, D. C., & Choe, H. (2010). Hydrogen-induced transformation superplasticity in zirconium. International Journal of Hydrogen Energy, 35(11), 5708-5713. doi:10.1016/j.ijhydene.2010.03.088

Jorgensen, D. J., & Dunand, D. C. (2010). Ti-6Al-4V with micro- and macropores produced by powder sintering and electrochemical dissolution of steel wires. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 527(3), 849-853. doi:10.1016/j.msea.2009.08.034

Knipling, K. E., Karnesky, R. A., Lee, C. P., Dunand, D. C., & Seidman, D. N. (2010). Precipitation evolution in Al-0.1Sc, Al-0.1Zr and Al-0.1Sc-0.1Zr (at.%) alloys during isochronal aging. Acta Materialia, 58(15), 5184-5195. doi:10.1016/j.actamat.2010.05.054

Krug, M. E., Werber, A., Dunand, D. C., & Seidman, D. N. (2010). Core-shell nanoscale precipitates in Al-0.06 at.% Sc microalloyed with Tb, Ho, Tm or Lu. Acta Materialia, 58(1), 134-145. doi:10.1016/j.actamat.2009.08.074

Monachon, C., Dunand, D. C., & Seidman, D. N. (2010). Atomic-Scale Characterization of Aluminum-Based Multishell Nanoparticles Created by Solid-State Synthesis. Small, 6(16), 1728-1731. doi:10.1002/smll.201000325

Oppenheimer, S., & Dunand, D. C. (2010). Solid-state foaming of Ti-6Al-4V by creep or superplastic expansion of argon-filled pores. Acta Materialia, 58(13), 4387-4397. doi:10.1016/j.actamat.2010.04.034

Scott, J. A., & Dunand, D. C. (2010). Processing and mechanical properties of porous Fe-26Cr-1Mo for solid oxide fuel cell interconnects. Acta Materialia, 58(18), 6125-6133. doi:10.1016/j.actamat.2010.07.030

Ye, B., & Dunand, D. C. (2010). Titanium foams produced by solid-state replication of NaCl powders. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 528(2), 691-697. doi:10.1016/j.msea.2010.09.054

Ye, B., Matsen, M. R., & Dunand, D. C. (2010). Enhanced densification of Ti-6Al-4V powders by transformation-mismatch plasticity. Acta Materialia, 58(11), 3851-3859. doi:10.1016/j.actamat.2010.03.047

Young, M. L., Casadio, F., Marvin, J., Chase, W. T., & Dunand, D. C. (2010). AN ANCIENT CHINESE BRONZE FRAGMENT RE-EXAMINED AFTER 50 YEARS: CONTRIBUTIONS FROM MODERN AND TRADITIONAL TECHNIQUES. Archaeometry, 52, 1015-1043. doi:10.1111/j.1475-4754.2009.00512.x

2009

Bansiddhi, A., & Dunand, D. C. (2009). Shape-memory NiTi-Nb foams. Journal of Materials Research, 24(6), 2107-2117. doi:10.1557/jmr.2009.0256

Beeri, O., & Dunand, D. C. (2009). Transformation mismatch plasticity in Pd induced by cyclic hydrogen charging. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 523(1-2), 178-183. doi:10.1016/j.msea.2009.05.048

Boonyongmaneerat, Y., & Dunand, D. C. (2009). Effects of strut geometry and pore fraction on creep properties of cellular materials. Acta Materialia, 57(5), 1373-1384. doi:10.1016/j.actamat.2008.11.027

Chen, Y., Zhang, X. X., Dunand, D. C., & Schuh, C. A. (2009). Shape memory and superelasticity in polycrystalline Cu-Al-Ni microwires. Applied Physics Letters, 95(17), 3. doi:10.1063/1.3257372

Chino, Y., & Dunand, D. C. (2009). Creating Aligned, Elongated Pores in Titanium Foams by Swaging of Preforms with Ductile Space-Holder. Advanced Engineering Materials, 11(1-2), 52-55. doi:10.1002/adem.200800232

Chmielus, M., Zhang, X. X., Witherspoon, C., Dunand, D. C., & Mullner, P. (2009). Giant magnetic-field-induced strains in polycrystalline Ni-Mn-Ga foams. Nature materials, 8(11), 863-866. doi:10.1038/nmat2527

DeFouw, J. D., & Dunand, D. C. (2009). Superplastic compressive flow in MgB2. Acta Materialia, 57(16), 4745-4750. doi:10.1016/j.actamat.2009.06.033

Fife, J. L., Li, J. C., Dunand, D. C., & Voorhees, P. W. (2009). Morphological analysis of pores in directionally freeze-cast titanium foams. Journal of Materials Research, 24(1), 117-124. doi:10.1557/jmr.2009.0023

Harada, Y., & Dunand, D. C. (2009). Microstructure of Al3Sc with ternary rare-earth additions. Intermetallics, 17(1-2), 17-24. doi:10.1016/j.intermet.2008.09.002

Karnesky, R. A., Dunand, D. C., & Seidman, D. N. (2009). Evolution of nanoscale precipitates in Al microalloyed with Sc and Er. Acta Materialia, 57(14), 4022-4031. doi:10.1016/j.actamat.2009.04.034

Oppenheimer, S. M., & Dunand, D. C. (2009). Porous NiTi by creep expansion of argon-filled pores. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 523(1-2), 70-76. doi:10.1016/j.msea.2009.05.045

van Dalen, M. E., Karnesky, R. A., Cabotaje, J. R., Dunand, D. C., & Seidman, D. N. (2009). Erbium and ytterbium solubilities and diffusivities in aluminum as determined by nanoscale characterization of precipitates. Acta Materialia, 57(14), 4081-4089. doi:10.1016/j.actamat.2009.05.007

Young, M. L., Rao, R., Almer, J. D., Haeffner, D. R., Lewis, J. A., & Dunand, D. C. (2009a). Effect of ceramic preform geometry on load partitioning in Al2O3-Al composites with three-dimensional periodic architecture. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 526(1-2), 190-196. doi:10.1016/j.msea.2009.07.033

Young, M. L., Rao, R., Almer, J. D., Haeffner, D. R., Lewis, J. A., & Dunand, D. C. (2009b). Load partitioning in Al2O3-Al composites with three-dimensional periodic architecture. Acta Materialia, 57(8), 2362-2375. doi:10.1016/j.actamat.2009.01.019

Young, M. L., Schnepp, S., Casadio, F., Lins, A., Meighan, M., Lambert, J. B., & Dunand, D. C. (2009). Matisse to Picasso: a compositional study of modern bronze sculptures. Analytical and Bioanalytical Chemistry, 395(1), 171-184. doi:10.1007/s00216-009-2938-y

2008

Bansiddhi, A., & Dunand, D. C. (2008a). Porous NiTi with superelastic or shape-memory properties. Advanced Materials & Processes, 166(7), 69-69.

Bansiddhi, A., & Dunand, D. C. (2008b). Shape-memory NiTi foams produced by replication of NaCl space-holders. Acta Biomaterialia, 4(6), 1996-2007. doi:10.1016/j.actbio.2008.06.005

Bansiddhi, A., Sargeant, T. D., Stupp, S. I., & Dunand, D. C. (2008). Porous NiTi for bone implants: A review. Acta Biomaterialia, 4(4), 773-782. doi:10.1016/j.actbio.2008.02.009

Boonyongmaneerat, Y., & Dunand, D. C. (2008). Ni-Mo-Cr foams processed by casting replication of sodium aluminate preforms. Advanced Engineering Materials, 10(4), 379-383. doi:10.1002/adem.200700300

Boonyongmaneerat, Y., Schuh, C. A., & Dunand, D. C. (2008). Mechanical properties of reticulated aluminium foams with electrodeposited Ni-W coatings. Scripta Materialia, 59(3), 336-339. doi:10.1016/j.scriptamat.2008.03.035

Brothers, A. H., & Dunand, D. C. (2008). Mechanical properties of a density-graded replicated aluminum foam. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 489(1-2), 439-443. doi:10.1016/j.msea.2007.11.076

Chen, Y.-c. K., Chu, Y., Yi, J., Cox, M., Dunand, D. C., & Shen, Q. (2008). 3-D TOMOGRAPHIC STUDIES OF ANNEALED NANOPOROUS GOLD USING TRANSMISSION X-RAY MICROSCOPE (TXM) AT ADVANCED PHOTON SOURCE.

Chino, Y., & Dunand, D. C. (2008a). Directionally freeze-cast titanium foam with aligned, elongated pores. Acta Materialia, 56(1), 105-113. doi:10.1016/j.actamat.2007.09.002

Choe, H., Abkowitz, S., Abkowitz, S. M., & Dunand, D. C. (2008). Mechanical properties of Ti-W alloys reinforced with TiC particles. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 485(1-2), 703-710. doi:10.1016/j.msea.2008.01.069

Choe, H., Schuh, C. A., & Dunand, D. C. (2008). Superplastic deformation induced by cyclic hydrogen charging. Journal of Applied Physics, 103(10), 9. doi:10.1063/1.2931003

Couteau, O., & Dunand, D. C. (2008). Creep of aluminum syntactic foams. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 488(1-2), 573-579. doi:10.1016/j.msea.2008.01.022

DeFouw, J. D., & Dunand, D. C. (2008). Mechanisms and kinetics of MgB(2) synthesis from boron fibers. Acta Materialia, 56(19), 5751-5763. doi:10.1016/j.actamat.2008.07.049

DeFouw, J. D., Quintana, J. P., & Dunand, D. C. (2008). In situ X-ray synchrotron diffraction study of MgB2 synthesis from elemental powders. Acta Materialia, 56(8), 1680-1688. doi:10.1016/j.actamat.2007.12.014

Erk, K. A., Dunand, D. C., & Shull, K. R. (2008). Titanium with controllable pore fractions by thermo reversible gelcasting of TiH2. Acta Materialia, 56(18), 5147-5157. doi:10.1016/j.actamat.2008.06.035

Knipling, K. E., & Dunand, D. C. (2008). Creep resistance of cast and aged Al-0.1Zr and Al-0.1Zr-0.1Ti (at.%) alloys at 300-400 degrees C. Scripta Materialia, 59(4), 387-390. doi:10.1016/j.scriptamat.2008.02.059

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2008a). Precipitation evolution in Al-Zr and Al-Zr-Ti alloys during aging at 450-600 degrees C. Acta Materialia, 56(6), 1182-1195. doi:10.1016/j.actamat.2007.11.011

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2008b). Precipitation evolution in Al-Zr and Al-Zr-Ti alloys during isothermal aging at 375-425 degrees C. Acta Materialia, 56(1), 114-127. doi:10.1016/j.actamat.2007.09.004

Krug, M. E., Dunand, D. C., & Seidman, D. N. (2008). Composition profiles within Al(3)Li and Al(3)Sc/Al(3)Li nanoscale precipitates in aluminum. Applied Physics Letters, 92(12), 3. doi:10.1063/1.2901150

Kwok, P. J., Oppenheimer, S. M., & Dunand, D. C. (2008). Porous Titanium by Electro-chemical Dissolution of Steel Space-holders. Advanced Engineering Materials, 10(9), 820-825. doi:10.1002/adem.200800072

Lefebvre, L. P., Banhart, J., & Dunand, D. C. (2008). Porous Metals and Metallic Foams: Current Status and Recent Developments. Advanced Engineering Materials, 10(9), 775-787. doi:10.1002/adem.200800241

Li, Q. Z., Chen, E. Y., Bice, D. R., & Dunand, D. C. (2008a). Mechanical Properties of Cast Ti-6Al-2Sn-4Zr-2Mo Lattice Block Structure. Advanced Engineering Materials, 10(10), 939-942. doi:10.1002/adem.200800114

Li, Q. Z., Chen, E. Y., Bice, D. R., & Dunand, D. C. (2008b). Mechanical properties of cast Ti-6Al-4V lattice block structures. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 39A(2), 441-449. doi:10.1007/s11661-007-9440-y

Mueller, R., Rossoll, A., Weber, L., Bourke, M. A. M., Dunand, D. C., & Mortensen, A. (2008). Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking. Acta Materialia, 56(16), 4402-4416. doi:10.1016/j.actamat.2008.05.004

Sargeant, T. D., Guler, M. O., Oppenheimer, S. M., Mata, A., Satcher, R. L., Dunand, D. C., & Stupp, S. I. (2008). Hybrid bone implants: Self-assembly of peptide amphiphile nanofibers within porous titanium. Biomaterials, 29(2), 161-171. doi:10.1016/j.biomaterials.2007.09.012

Sargeant, T. D., Oppenheimer, S. M., Dunand, D. C., & Stupp, S. I. (2008). Titanium foam-bioactive nanofiber hybrids for bone regeneration. Journal of tissue engineering and regenerative medicine, 2(8), 455-462. doi:10.1002/term.117

Spoerke, E. D., Murray, N. G. D., Li, H., Brinson, L. C., Dunand, D. C., & Stupp, S. I. (2008). Titanium with aligned, elongated pores for orthopedic tissue engineering applications. Journal of Biomedical Materials Research Part A, 84A(2), 402-412. doi:10.1002/jbm.a.31317

van Dalen, M. E., Seidman, D. N., & Dunand, D. C. (2008). Creep- and coarsening properties of Al-0.06 at.% Sc-0.06 at.% Ti at 300-450 degrees C. Acta Materialia, 56(16), 4369-4377. doi:10.1016/j.actamat.2008.05.002

2007

Bansiddhi, A., & Dunand, D. C. (2007). Shape-memory NiTi foams produced by solid-state replication with NaF. Intermetallics, 15(12), 1612-1622. doi:10.1016/j.intermet.2007.06.013

Boonyongmaneerat, Y., Chmielus, M., Dunand, D. C., & Mullner, P. (2007). Increasing magnetoplasticity in polycrystalline Ni-Mn-Ga by reducing internal constraints through porosity. Physical Review Letters, 99(24), 4. doi:10.1103/PhysRevLett.99.247201

Brothers, A. H., & Dunand, D. C. (2007). Porous and foamed amorphous metals. Mrs Bulletin, 32(8), 639-643. doi:10.1557/mrs2007.126

Brothers, A. H., Dunand, D. C., Zheng, Q., & Xu, J. (2007). Amorphous Mg-based metal foams with ductile hollow spheres. Journal of Applied Physics, 102(2), 6. doi:10.1063/1.2756043

Daymond, M. R., Young, M. L., Almer, J. D., & Dunand, D. C. (2007). Strain and texture evolution during mechanical loading of a crack tip in martensitic shape-memory NiTi. Acta Materialia, 55(11), 3929-3942. doi:10.1016/j.actamat.2007.03.013

Karnesky, R. A., Meng, L., & Dunand, D. C. (2007). Strengthening mechanisms in aluminum containing coherent Al3Sc precipitates and incoherent Al2O3 dispersoids. Acta Materialia, 55(4), 1299-1308. doi:10.1016/j.actamat.2006.10.004

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2007a). Atom probe tomographic studies of precipitation in Al-0.1Zr-0.1Ti (at.%) alloys. Microscopy and Microanalysis, 13(6), 503-516. doi:10.1017/s1431927607070882

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2007b). Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 38A(10), 2552-2563. doi:10.1007/s11661-007-9283-6

Li, Q. Z., Chen, E. Y., Bice, D. R., & Dunand, D. C. (2007). Transformation superplasticity of cast titanium and Ti-6Al-4V. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 38A(1), 44-53. doi:10.1007/s11661-006-9020-6

Matsumoto, Y., Brothers, A. H., Stock, S. R., & Dunand, D. C. (2007). Uniform and graded chemical milling of aluminum foams. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 447(1-2), 150-157. doi:10.1016/j.msea.2006.10.049

Oppenheimer, S. M., & Dunand, D. C. (2007). Finite element modeling of creep deformation in cellular metals. Acta Materialia, 55(11), 3825-3834. doi:10.1016/j.actamat.2007.02.033

Oppenheimer, S. M., Yung, A. R., & Dunand, D. C. (2007). Power-law creep in near-equiatomic nickel-titanium alloys. Scripta Materialia, 57(5), 377-380. doi:10.1016/j.scriptamat.2007.05.004

Van Dalen, M., Gyger, T., Dunand, D., & Seidman, D. (2007). Effects of Zr on the Microstructure and Mechanical Properties of Al-Sc-Yb Alloys. Microscopy and Microanalysis, 13(S02), 1618.

Young, M. L., Almer, J. D., Daymond, M. R., Haeffner, D. R., & Dunand, D. C. (2007). Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel. Acta Materialia, 55(6), 1999-2011. doi:10.1016/j.actamat.2006.11.004

Young, M. L., DeFouw, J., Almer, J. D., & Dunand, D. C. (2007). Load partitioning during compressive loading of a Mg/MgB2 composite. Acta Materialia, 55(10), 3467-3478. doi:10.1016/j.actamat.2007.01.046

2006

Balch, D. K., & Dunand, D. C. (2006). Load partitioning in aluminum syntactic foams containing ceramic microspheres. Acta Materialia, 54(6), 1501-1511. doi:10.1016/j.actamat.2005.11.017

Brothers, A. H., & Dunand, D. C. (2006a). Amorphous metal foams. Scripta Materialia, 54(4), 513-520. doi:10.1016/j.scriptamat.2005.10.048

Brothers, A. H., & Dunand, D. C. (2006b). Density-graded cellular aluminum. Advanced Engineering Materials, 8(9), 805-809. doi:10.1002/adem.200600074

Brothers, A. H., Prine, D. W., & Dunand, D. C. (2006). Acoustic emissions analysis of damage in amorphous and crystalline metal foams. Intermetallics, 14(8-9), 857-865. doi:10.1016/j.intermet.2006.01.029

Karnesky, R. A., van Dalen, M. E., Dunand, D. C., & Seidman, D. N. (2006). Effects of substituting rare-earth elements for scandium in a precipitation-strengthened Al-0.08 at. %Sc alloy. Scripta Materialia, 55(5), 437-440. doi:10.1016/j.scriptamat.2006.05.021

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2006). Criteria for developing castable, creep-resistant aluminum-based alloys - A review. Zeitschrift für Metallkunde, 97(3), 246-265.

Marvin, J. D., & Dunand, D. C. (2006). Transformation-mismatch plasticity in sub-millimeter iron wires. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 421(1-2), 35-39. doi:10.1016/j.msea.2005.10.014

Murray, N. G. D., & Dunand, D. C. (2006). Effect of initial preform porosity on solid-state foaming of titanium. Journal of Materials Research, 21(5), 1175-1188. doi:10.1557/jmr.2006.0140

Shen, H., Oppenheimer, S. M., Dunand, D. C., & Brinson, L. C. (2006). Numerical modeling of pore size and distribution in foamed titanium. Mechanics of materials, 38(8-10), 933-944. doi:10.1016/j.mechmat.2005.06.027

van Dalen, M. E., Dunand, D. C., & Seidman, D. N. (2006). Nanoscale precipitation and mechanical properties of Al-0.06 at.% Sc alloys microalloyed with Yb or Gd. Journal of Materials Science, 41(23), 7814-7823. doi:10.1007/s10853-006-0664-9

Wilkes, T. E., Young, M. L., Sepulveda, R. E., Dunand, D. C., & Faber, K. T. (2006). Composites by aluminum infiltration of porous silicon carbide derived from wood precursors. Scripta Materialia, 55(12), 1083-1086. doi:10.1016/j.scriptamat.2006.08.040

Young, M. L., Casadio, F., Schnepp, S., Almer, J., Haeffner, D. R., & Dunand, D. C. (2006). Synchrotron X-ray diffraction and imaging of ancient Chinese bronzes. Applied Physics a-Materials Science & Processing, 83(2), 163-168. doi:10.1007/s00339-006-3504-5

2005

Balch, D. K., O'Dwyer, J. G., Davis, G. R., Cady, C. M., Gray, G. T., & Dunand, D. C. (2005). Plasticity and damage in aluminum syntactic foams deformed under dynamic and quasi-static conditions. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 391(1-2), 408-417. doi:10.1016/j.msea.2004.09.012

Brothers, A. H., & Dunand, D. C. (2005a). Ductile bulk metallic glass foams. Advanced Materials, 17(4), 484-+. doi:10.1002/adma.200400897

Brothers, A. H., & Dunand, D. C. (2005b). Plasticity and damage in cellular amorphous metals. Acta Materialia, 53(16), 4427-4440. doi:10.1016/j.actamat.2005.06.002

Brothers, A. H., Scheunemann, R., DeFouw, J. D., & Dunand, D. C. (2005). Processing and structure of open-celled amorphous metal foams. Scripta Materialia, 52(4), 335-339. doi:10.1016/j.scriptamat.2004.10.002

Choe, H., Abkowitz, S. A., Abkowitz, S., & Dunand, D. C. (2005). Effect of tungsten additions on the mechanical properties of Ti-6Al-4V. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 396(1-2), 99-106. doi:10.1016/j.msea.2005.01.051

Choe, H., Abkowitz, S. M., Abkowitz, S., & Dunand, D. C. (2005). Effect of tungsten dissolution on the mechanical properties of Ti-W composites. Journal of Alloys and Compounds, 390(1-2), 62-66. doi:10.1016/j.jallcom.2004.08.021

Greiner, C., Oppenheimer, S. M., & Dunand, D. C. (2005). High strength, low stiffness, porous NiTi with superelastic properties. Acta Biomaterialia, 1(6), 705-716. doi:10.1016/j.actbio.2005.07.005

Marzik, J. V., Suplinskas, R. J., Croft, W. J., MoberlyChan, W. J., DeFouw, J. D., & Dunand, D. C. (2005). The effect of dopant additions on the microstructure of boron fibers before and after reaction to MgB2. In J. Li, N. E. Brese, M. G. Kanatzidis, & M. Jansen (Eds.), Solid-State Chemistry of Inorganic Materials V (Vol. 848, pp. 239-244). Warrendale: Materials Research Society.

Spoerke, E. D., Murray, N. G., Li, H. L., Brinson, L. C., Dunand, D. C., & Stupp, S. I. (2005). A bioactive titanium foam scaffold for bone repair. Acta Biomaterialia, 1(5), 523-533. doi:10.1016/j.actbio.2005.04.005 van Dalen, M. E., Dunand, D. C., & Seidman, D. N. (2005). Effects of Ti additions on the nanostructure and creep properties of precipitation-strengthened Al-Sc alloys. Acta Materialia, 53(15), 4225-4235. doi:10.1016/j.actamat.2005.05.022

Young, M. L., Almer, J. D., Lienert, U., Fezzaa, K., Lee, W. K., Haeffner, D. R., & Dunand, D. C. (2005). Internal strain measurements and X-ray Imaging in interpenetrating-phase Al2O3/Al composites. In S. R. Bhatia, P. G. Khalifah, D. J. Pochan, & P. G. Radaelli (Eds.), Neutron and X-Ray Scattering as Probes of Multiscale Phenomena (Vol. 840, pp. 225-230). Warrendale: Materials Research Soc.

2004

Balch, D. K., & Dunand, D. C. (2004). Copper-zirconium tungstate composites exhibiting low and negative thermal expansion influenced by reinforcement phase transformations. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 35A(3A), 1159-1165.

Brothers, A. H., & Dunand, D. C. (2004). Syntactic bulk metallic glass foam. Applied Physics Letters, 84(7), 1108-1110. doi:10.1063/1.1646467

Choe, H., & Dunand, D. C. (2004a). Mechanical properties of oxidation-resistant Ni-Cr foams. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 384(1-2), 184-193. doi:10.1016/j.msea.2004.06.045

Choe, H., & Dunand, D. C. (2004b). Synthesis, structure, and mechanical properties of Ni-Al and Ni-Cr-Al superalloy foams. Acta Materialia, 52(5), 1283-1295. doi:10.1016/j.actamat.2003.11.012

Dunand, D. C. (2004). Processing of titanium foams. Advanced Engineering Materials, 6(6), 369-376. doi:10.1002/adem.200405576

Gonzalez, H. J., & Dunand, D. C. (2004). Transformation superplasticity in Zircadyne 705. Journal of Materials Engineering and Performance, 13(6), 665-669. doi:10.1361/10599490421268

Kouzeli, M., & Dunand, D. C. (2004). Effect of temperature and strain rate on the compressive flow of aluminum composites containing submicron alumina particles. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 35A(1), 287-292. doi:10.1007/s11661-004-0129-1

Li, H. L., Oppenheimer, S. M., Stupp, S. I., Dunand, D. C., & Brinson, L. C. (2004). Effects of pore morphology and bone ingrowth on mechanical properties of microporous titanium as an orthopaedic implant material. Materials Transactions, 45(4), 1124-1131. doi:10.2320/matertrans.45.1124

Murray, N. G. D., & Dunand, D. C. (2004a). Effect of thermal history on the superplastic expansion of argon-filled pores in titanium: Part I kinetics and microstructure. Acta Materialia, 52(8), 2269-2278. doi:10.1016/j.actamat.2004.01.039

Murray, N. G. D., & Dunand, D. C. (2004b). Effect of thermal history on the superplastic expansion of argon-filled pores in titanium: Part II modeling of kinetics. Acta Materialia, 52(8), 2279-2291. doi:10.1016/j.actamat.2004.01.019

Yilmaz, S., & Dunand, D. C. (2004). Finite-element analysis of thermal expansion and thermal mismatch stresses in a Cu-60vol%ZrW2O8 composite. Composites Science and Technology, 64(12), 1895-1898. doi:10.1016/j.compscitech.2004.02.002

2003

Balch, D. K., Ustundag, E., & Dunand, D. C. (2003a). Diffraction strain measurements in a partially crystallized bulk metallic glass composite containing ductile particles. Journal of Non-Crystalline Solids, 317(1-2), 176-180. doi:10.1016/s0022-3093(02)02008-2

Balch, D. K., Ustundag, E., & Dunand, D. C. (2003b). Elasto-plastic load transfer in bulk metallic glass composites containing ductile particles. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 34A(9), 1787-1797. doi:10.1007/s11661-003-0145-6

DeFouw, J. D., & Dunand, D. C. (2003). In situ synthesis of superconducting MgB2 fibers within a magnesium matrix. Applied Physics Letters, 83(1), 120-122. doi:10.1063/1.1591243

Frary, M., Abkowitz, S., Abkowitz, S. M., & Dunand, D. C. (2003). Microstructure and mechanical properties of Ti/W and Ti-6Al-4V/W composites fabricated by powder-metallurgy. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 344(1-2), 103-112. doi:10.1016/s0921-5093(02)00426-4

Fuller, C. B., Seidman, D. N., & Dunand, D. C. (2003a). Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures. Acta Materialia, 51(16), 4803-4814. doi:10.1016/s1359-6454(03)00320-3

Harada, Y., & Dunand, D. C. (2003). Thermal expansion of Al3Sc and Al-3(Sc0.75X0.25). Scripta Materialia, 48(3), 219-222. doi:10.1016/s1359-6462(02)00428-1

Hodge, A. M., & Dunand, D. C. (2003). Measurement and modeling of creep in open-cell NiAl foams. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 34A(10), 2353-2363. doi:10.1007/s11661-003-0298-3

Kouzeli, M., & Dunand, D. C. (2003). Effect of reinforcement connectivity on the elasto-plastic behavior of aluminum composites containing sub-micron alumina particles. Acta Materialia, 51(20), 6105-6121. doi:10.1016/s1359-6454(03)00431-2

Marchi, C. S., Kouzeli, M., Rao, R., Lewis, J. A., & Dunand, D. C. (2003). Alumina-aluminum interpenetrating-phase composites with three-dimensional periodic architecture. Scripta Materialia, 49(9), 861-866. doi:10.1016/s1359-6462(03)00441-x

Marquis, E. A., Seidman, D. N., & Dunand, D. C. (2003a). Effect of Mg addition on the creep and yield behavior of an Al-Sc alloy. Acta Materialia, 51(16), 4751-4760. doi:10.1016/s1359-6454(03)00288-x

Marquis, E. A., Seidman, D. N., & Dunand, D. C. (2003c). Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys (vol 50, pg 4021, 2002). Acta Materialia, 51(1), 285-287. doi:10.1016/s1359-6454(02)00496-2

Murray, N. G. D., & Dunand, D. C. (2003). Microstructure evolution during solid-state foaming of titanium. Composites Science and Technology, 63(16), 2311-2316. doi:10.1016/s0266-3538(03)00264-1

Murray, N. G. D., Schuh, C. A., & Dunand, D. C. (2003). Solid-state foaming of titanium by hydrogen-induced internal-stress superplasticity. Scripta Materialia, 49(9), 879-883. doi:10.1016/s1359-6462(03)00438-x

San Marchi, C., Brothers, A., & Dunand, D. C. (2003). Melt infiltration processing of foams using glass-forming alloys. In T. Egami, A. L. Greer, A. Inoue, & S. Ranganathan (Eds.), Supercooled Liquids, Glass Transition and Bulk Metallic Glasses (Vol. 754, pp. 199-204). Warrendale: Materials Research Society.

Schuster, A., Voggenreiter, H. F., Dunand, D. C., & Eggeler, G. (2003). A new type of intrinsic two-way shape-memory effect in hooks of NiTi-wires. Journal De Physique Iv, 112, 1177-1180. doi:10.1051/jp4:20031092

Vaidyanathan, R., Bourke, M., & Dunand, D. (2003). Investigating shape-memory alloys and composites with neutron-diffraction techniques. Neutron News, 14(1), 19-22.

Vaidyanathan, R., Bourke, M. A. M., & Dunand, D. C. (2003). An in situ neutron diffraction mechanical study of superelastic NiTi and NiTi-TiC composites. Journal De Physique Iv, 112, 823-826. doi:10.1051/jp4:20031008

2002

Bourke, M. A. M., Dunand, D. C., & Ustundag, E. (2002). SMARTS - a spectrometer for strain measurement in engineering materials. Applied Physics a-Materials Science & Processing, 74, S1707-S1709. doi:10.1007/s003390201747

Dunand, D. C., Hodge, A. M., & Schuh, C. (2002). Pack aluminisation kinetics of nickel rods and foams. Materials Science and Technology, 18(3), 326-332. doi:10.1179/026708302225001804

Frary, M., Schuh, C., & Dunand, D. C. (2002). Kinetics of biaxial dome formation by transformation superplasticity of titanium alloys and composites. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 33(6), 1669-1680. doi:10.1007/s11661-002-0176-4

Fuller, C. B., Krause, A. R., Dunand, D. C., & Seidman, D. N. (2002). Microstructure and mechanical properties of a 5754 aluminum alloy modified by Sc and Zr additions. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 338(1-2), 8-16. doi:10.1016/s0921-5093(02)00056-4

Harada, Y., & Dunand, D. C. (2002). Microstructure of Al(3)Sc with ternary transition-metal additions. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 329, 686-695. doi:10.1016/s0921-5093(01)01608-2

Marquis, E. A., & Dunand, D. C. (2002). Model for creep threshold stress in precipitation-strengthened alloys with coherent particles. Scripta Materialia, 47(8), 503-508. doi:10.1016/s1359-6462(02)00165-3

Schuh, C. A., & Dunand, D. C. (2002a). Enhanced densification of zinc powders through thermal cycling. Acta Materialia, 50(6), 1349-1358. doi:10.1016/s1359-6454(01)00439-6

Schuh, C. A., & Dunand, D. C. (2002b). Transformation superplasticity of water ice and ice containing SiO2 particulates. Journal of Geophysical Research-Planets, 107(E11), 10. doi:10.1029/2001je001840

Seidman, D. N., Marquis, E. A., & Dunand, D. C. (2002). Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys. Acta Materialia, 50(16), 4021-4035. doi:10.1016/s1359-6454(02)00201-x

Zwigl, P., & Dunand, D. C. (2002). Transformation-mismatch plasticity of NiAl/ZrO2 composites - finite-element modeling. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 335(1-2), 128-136. doi:10.1016/s0921-5093(01)01901-3

2001

Davis, N. G., Teisen, J., Schuh, C., & Dunand, D. C. (2001). Solid-state foaming of titanium by superplastic expansion of argon-filled pores. Journal of Materials Research, 16(5), 1508-1519. doi:10.1557/jmr.2001.0210

Dunand, D. C. (2001). Synthesis of superconducting Mg/MgB2 composites. Applied Physics Letters, 79(25), 4186-4188. doi:10.1063/1.1427439

Dunand, D. C., Schuh, C., & Goldsby, D. L. (2001). Pressure-induced transformation plasticity of H(2)O ice. Physical Review Letters, 86(4), 668-671. doi:10.1103/PhysRevLett.86.668

Dunand, D. C., & Zwigl, P. (2001). Hydrogen-induced internal-stress plasticity in titanium. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 32(3A), 841-843. doi:10.1007/s11661-001-1019-4

Frary, M., Schuh, C., & Dunand, D. C. (2001). Strain ratchetting of titanium upon reversible alloying with hydrogen. Philosophical Magazine a-Physics of Condensed Matter Structure Defects and Mechanical Properties, 81(1), 197-212.

Han, B. Q., & Dunand, D. C. (2001). Creep of magnesium strengthened with high volume fractions of yttria dispersoids. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 300(1-2), 235-244. doi:10.1016/s0921-5093(00)01781-0

Hodge, A. M., & Dunand, D. C. (2001). Synthesis of nickel-aluminide foams by pack-aluminization of nickel foams. Intermetallics, 9(7), 581-589. doi:10.1016/s0966-9795(01)00047-4

Schuh, C., & Dunand, D. C. (2001a). Internal stress plasticity due to chemical stresses. Acta Materialia, 49(17), 3387-3400. doi:10.1016/s1359-6454(01)00272-5

Schuh, C., & Dunand, D. C. (2001b). Load transfer during transformation superplasticity of Ti-6Al-4V/TiB whisker-reinforced composites. Scripta Materialia, 45(6), 631-638. doi:10.1016/s1359-6462(01)01072-7

Schuh, C., & Dunand, D. C. (2001c). Non-isothermal transformation-mismatch plasticity: Modeling and experiments on Ti-6Al-4V. Acta Materialia, 49(2), 199-210. doi:10.1016/s1359-6454(00)00318-9

Schuh, C., & Dunand, D. C. (2001d). An overview of power-law creep in polycrystalline beta-titanium. Scripta Materialia, 45(12), 1415-1421. doi:10.1016/s1359-6462(01)01178-2

Schuh, C., & Dunand, D. C. (2001e). Tensile fracture during transformation superplasticity of Ti-6Al-4V. Journal of Materials Research, 16(3), 865-875. doi:10.1557/jmr.2001.0115

Schuh, C., & Dunand, D. C. (2001f). Transformation superplasticity of Ti-6Al-4V and Ti-6Al-4V/TiC composites at high stresses. In N. Chandra (Ed.), Superplasticity in Advanced Materials, Icsam-2000 (Vol. 357-3, pp. 177-182). Zurich-Uetikon: Trans Tech Publications Ltd.

Schuh, C., & Dunand, D. C. (2001g). Whisker alignment of Ti-6Al-4V/TiB composites during deformation by transformation superplasticity. International Journal of Plasticity, 17(3), 317-340. doi:10.1016/s0749-6419(00)00038-3

Vaidyanathan, R., Bourke, M. A. M., & Dunand, D. C. (2001). Texture, strain, and phase-fraction measurements during mechanical cycling in superelastic NiTi. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 32(3A), 777-786

Venkatesh, T. A., & Dunand, D. C. (2001). Tertiary compression creep of long-fiber composites: A model for fiber kinking and buckling. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 32(1), 183-196. doi:10.1007/s11661-998-0336-2

Zwigl, P., & Dunand, D. C. (2001a). Internal-stress plasticity in titanium by cyclic alloying/dealloying with hydrogen. Journal of Materials Processing Technology, 117(3), 409-417. doi:10.1016/s0924-0136(01)00801-9

Zwigl, P., & Dunand, D. C. (2001b). Transformation-mismatch plasticity of NiAl/ZrO2 composites - experiments and continuum modeling. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 298(1-2), 63-72. doi:10.1016/s0921-5093(00)01343-5

2000

Dunand, D. C., & Grabowski, J. L. (2000). Tensile transformation-mismatch plasticity of bismuth sesquioxide. Journal of the American Ceramic Society, 83(10), 2521-2528.

Grabowski, J. L., & Dunand, D. C. (2000). Tensile creep properties of delta-Bi2O3. Scripta Materialia, 43(11), 1033-1038. doi:10.1016/s1359-6462(00)00531-5

Han, B. Q., & Dunand, D. C. (2000). Microstructure and mechanical properties of magnesium containing high volume fractions of yttria dispersoids. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 277(1-2), 297-304. doi:10.1016/s0921-5093(99)00074-x

Harada, Y., & Dunand, D. C. (2000). Creep properties of Al3Sc and Al-3(Sc, X) intermetallics. Acta Materialia, 48(13), 3477-3487. doi:10.1016/s1359-6454(00)00142-7

Schuh, C., & Dunand, D. C. (2000). Assessing failure mechanisms during transformation superplasticity of Ti-6Al-4V. In P. B. Berbon, M. Z. Berbon, T. Sakuma, & T. G. Langdon (Eds.), Superplasticity-Current Status and Future Potential (Vol. 601, pp. 55-60). Warrendale: Materials Research Society.

Schuh, C., Dunand, D. C., Wanner, A., & Clemens, H. (2000). Thermal-cycling creep of gamma-TiAl-based alloys. Intermetallics, 8(4), 339-343. doi:10.1016/s0966-9795(99)00093-x

Schuh, C., Han, B. Q., & Dunand, D. C. (2000). Enhanced densification of cavitated dispersion-strengthened aluminum by thermal cycling. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 31(10), 2647-2657. doi:10.1007/s11661-000-0209-9

Schuh, C., Noel, P., & Dunand, D. C. (2000). Enhanced densification of metal powders by transformation-mismatch plasticity. Acta Materialia, 48(8), 1639-1653. doi:10.1016/s1359-6454(00)00018-5

Vaidyanathan, R., Dunand, D. C., & Ramamurty, U. (2000). Fatigue crack-growth in shape-memory NiTi and NiTi-TiC composites. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 289(1-2), 208-216. doi:10.1016/s0921-5093(00)00882-0

Venkatesh, T. A., & Dunand, D. C. (2000). Reactive infiltration processing and secondary compressive creep of NiAl and NiAl-W composites. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 31(3), 781-792. doi:10.1007/s11661-000-0020-7

Wanner, A., & Dunand, D. C. (2000a). Synchrotron X-ray study of bulk lattice strains in externally loaded Cu-Mo composites. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 31(11), 2949-2962. doi:10.1007/bf02830344

Wanner, A., & Dunand, D. C. (2000b). Synchrotron x-ray study of elastic phase strains in the bulk of an externally loaded Cu/Mo composite. In S. R. Stock, S. M. Mini, & D. L. Perry (Eds.), Applications of Synchrotron Radiation Techniques to Materials Science V (Vol. 590, pp. 157-162). Warrendale: Materials Research Society.

1999

Daymond, M. R., Lund, C., Bourke, M. A. M., & Dunand, D. C. (1999). Elastic phase-strain distribution in a particulate-reinforced metal-matrix composite deforming by slip or creep. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 30(11), 2989-2997. doi:10.1007/s11661-999-0136-3

Fuller, C. B., Seidman, D. N., & Dunand, D. C. (1999). Creep properties of coarse-grained Al(Sc) alloys at 300 degrees C. Scripta Materialia, 40(6), 691-696. doi:10.1016/s1359-6462(98)00468-0

Han, B. Q., Agnew, S. R., & Dunand, D. C. (1999). High-strain-rate deformation of pure aluminum reinforced with 25% alumina submicron particles near the solidus temperature. Scripta Materialia, 40(7), 801-808. doi:10.1016/s1359-6462(99)00013-5

Holzer, H., & Dunand, D. C. (1999). Phase transformation and thermal expansion of Cu/ZrW2O8 metal matrix composites. Journal of Materials Research, 14(3), 780-789. doi:10.1557/jmr.1999.0104

Lefeuvre, J. M., & Dunand, D. C. (1999). Thermo-elastic response of monolithic and composite plates to a thermal shock. Mechanics of materials, 31(5), 351-365. doi:10.1016/s0167-6636(99)00005-8

Schuh, C., & Dunand, D. C. (1999). Contributions to transformation superplasticity of titanium from rigid particles and pressurized pores. Scripta Materialia, 40(11), 1305-1312. doi:10.1016/s1359-6462(99)00068-8

Vaidyanathan, R., Bourke, M. A. M., & Dunand, D. C. (1999a). Analysis of neutron diffraction spectra acquired in situ during stress-induced transformations in superelastic NiTi. Journal of Applied Physics, 86(6), 3020-3029. doi:10.1063/1.371163

Vaidyanathan, R., Bourke, M. A. M., & Dunand, D. C. (1999b). Phase fraction, texture and strain evolution in superelastic NiTi and NiTi-TiC composites investigated by neutron diffraction. Acta Materialia, 47(12), 3353-3366. doi:10.1016/s1359-6454(99)00214-1

Vaidyanathan, R., Bourke, M. A. M., & Dunand, D. C. (1999c). Stress-induced martensitic transformations in NiTi and NiTi-TiC composites investigated by neutron diffraction. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 273, 404-409. doi:10.1016/s0921-5093(99)00307-x

Venkatesh, T. A., & Dunand, D. C. (1999). A model for the longitudinal primary creep of a long-fiber composite. Acta Materialia, 47(17), 4275-4282. doi:10.1016/s1359-6454(99)00308-0

Zwigl, P., & Dunand, D. C. (1999). A numerical model of transformation superplasticity for iron. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 262(1-2), 166-172. doi:10.1016/s0921-5093(98)00991-5

1998

Dunand, D. C., & Teisen, J. (1998). Superplastic foaming of titanium and Ti-6Al-4V. In D. S. Schwartz, D. S. Shih, A. G. Evans, & H. N. G. Wadley (Eds.), Porous and Cellular Materials for Structure Applications (Vol. 521, pp. 231-236). Warrendale: Materials Research Society.

Schuh, C., & Dunand, D. C. (1998). Transformation superplasticity of super alpha(2) titanium aluminide. Acta Materialia, 46(16), 5663-5675. doi:10.1016/s1359-6454(98)00252-3

Zwigl, P., & Dunand, D. C. (1998b). Transformation superplasticity of iron and Fe/TiC metal matrix composites. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 29(2), 565-575. doi:10.1007/s11661-998-0138-6

Zwigl, P., & Dunand, D. C. (1998c). Transformation superplasticity of zirconium. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 29(10), 2571-2582. doi:10.1007/s11661-998-0229-4

1997

Bourke, M. A. M., Dunand, D. C., Lawson, A. C., & Priesmeyer, H. G. (1997). Phase transformations in engineering materials (Vol. 2867). Bellingham: Spie - Int Soc Optical Engineering.

Dunand, D. C., FukamiUshiro, K. L., Mari, D., Roberts, J. A., & Bourke, M. A. (1997). Mechanical properties of NiTi-TiC shape-memory composites. In E. P. George, R. Gotthardt, K. Otsuka, S. TrolierMcKinstry, & M. WunFogle (Eds.), Materials for Smart Systems Ii (Vol. 459, pp. 131-142). Warrendale: Materials Research Society.

Dunand, D. C., & Jansen, A. M. (1997). Creep of metals containing high volume fractions of unshearable dispersoids .1. Modeling the effect of dislocation pile-ups upon the detachment threshold stress. Acta Materialia, 45(11), 4569-4581. doi:10.1016/s1359-6454(97)00135-3

Dunand, D. C., & Myojin, S. (1997). Biaxial deformation of Ti-6Al-4V and Ti-6Al-4V/TiC composites by transformation-mismatch superplasticity. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 230(1-2), 25-32. doi:10.1016/s0921-5093(97)00033-6

Jansen, A. M., & Dunand, D. C. (1997). Creep of metals containing high volume fractions of unshearable dispersoids .2. Experiments in the Al-Al2O3 system and comparison to models. Acta Materialia, 45(11), 4583-4592. doi:10.1016/s1359-6454(97)00136-5

Verdon, C., & Dunand, D. C. (1997). High-temperature reactivity in the ZrW2O8-Cu system. Scripta Materialia, 36(9), 1075-1080. doi:10.1016/s1359-6462(96)00481-2

Zwigl, P., & Dunand, D. C. (1997a). A non-linear model for internal stress superplasticity. Acta Materialia, 45(12), 5285-5294. doi:10.1016/s1359-6454(97)00186-9

1996

Bourke, M. A. M., Vaidyanathan, R., & Dunand, D. C. (1996). Neutron diffraction measurement of stress-induced transformation in superelastic NiTi. Applied Physics Letters, 69(17), 2477-2479. doi:10.1063/1.117503

Dunand, D. C., & Bedell, C. M. (1996). Transformation-mismatch superplasticity in reinforced and unreinforced titanium. Acta Materialia, 44(3), 1063-1076. doi:10.1016/1359-6454(95)00224-3

Dunand, D. C., Mari, D., Bourke, M. A. M., & Roberts, J. A. (1996). NiTi and NiTi-TiC composites .4. Neutron diffraction study of twinning and shape-memory recovery. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 27(9), 2820-2836. doi:10.1007/bf02652374

Fukami-Ushiro, K. L., & Dunand, D. C. (1996). NiTi and NiTi-TiC composites .3. Shape-memory recovery. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 27(1), 193-203. doi:10.1007/bf02647759

Fukami-Ushiro, K. L., Mari, D., & Dunand, D. C. (1996). NiTi and NiTi-TiC composites .2. Compressive mechanical properties. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 27(1), 183-191. doi:10.1007/bf02647758

Shelton, K., & Dunand, D. C. (1996). Computer modeling of particle pushing and clustering during matrix crystallization. Acta Materialia, 44(11), 4571-4585. doi:10.1016/1359-6454(96)00082-1

1995

Dunand, D. C. (1995). REACTIVE SYNTHESIS OF ALUMINIDE INTERMETALLICS. Materials and manufacturing processes, 10(3), 373-403. doi:10.1080/10426919508935033

Dunand, D. C., Mari, D., Bourke, M. A. M., & Goldstone, J. A. (1995). Neutron diffraction study of NiTi during compressive deformation and after shape-memory recovery. Journal De Physique Iv, 5(C8), 653-658.

Mari, D., Bataillard, L., Dunand, D. C., & Gotthardt, R. (1995). Martensitic transformation of NiTi and NiTi-TiC composites. Journal De Physique Iv, 5(C8), 659-664.

Mari, D., & Dunand, D. C. (1995). NITI AND NITI-TIC COMPOSITES .1. TRANSFORMATION AND THERMAL CYCLING BEHAVIOR. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 26(11), 2833-2847. doi:10.1007/bf02669642

Redsten, A. M., Klier, E. M., Brown, A. M., & Dunand, D. C. (1995). MECHANICAL-PROPERTIES AND MICROSTRUCTURE OF CAST OXIDE-DISPERSION-STRENGTHENED ALUMINUM. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 201(1-2), 88-102. doi:10.1016/0921-5093(94)09741-0

Takahashi, T., & Dunand, D. C. (1995a). NICKEL ALUMINIDE CONTAINING REFRACTORY-METAL DISPERSOIDS .1. SYNTHESIS BY REACTIVE MECHANICAL ALLOYING. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 192, 186-194. doi:10.1016/0921-5093(94)03234-3

Takahashi, T., & Dunand, D. C. (1995b). NICKEL ALUMINIDE CONTAINING REFRACTORY-METAL DISPERSOIDS .2. MICROSTRUCTURE AND PROPERTIES. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 192, 195-203. doi:10.1016/0921-5093(94)03235-1

Thomin, S. H., Noel, P. A., & Dunand, D. C. (1995). CRACKING MECHANISMS IN THERMALLY CYCLED TI-6AL-4V REINFORCED WITH SIC FIBERS. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 26(4), 883-895. doi:10.1007/bf02649085

1994

Dunand, D. C. (1994a). NIAL FORMATION BY ANNEALING OF INFILTRATED ALUMINUM-NICKEL PRECURSORS. Journal of Materials Science, 29(15), 4056-4060. doi:10.1007/bf00355969

Dunand, D. C. (1994b). A REVIEW OF REACTIVE SYNTHESIS OF ALUMINIDE INTERMETALLICS. Warrendale: Minerals, Metals & Materials Soc.

Neubauer, C. M., Mari, D., & Dunand, D. C. (1994). DIFFUSION IN THE NICKEL-RHENIUM SYSTEM. Scripta Metallurgica Et Materialia, 31(1), 99-104. doi:10.1016/0956-716x(94)90102-3

Noel, P. A., Dunand, D. C., & Mortensen, A. (1994). INITIAL-STAGE HOT-PRESSING OF SIC FIBRE/TI MONOTAPES. Composites, 25(10), 953-956. doi:10.1016/0010-4361(94)90111-2

Pezzee, C. F., & Dunand, D. C. (1994a). THE IMPINGEMENT EFFECT OF AN INERT, IMMOBILE 2ND PHASE ON THE RECRYSTALLIZATION OF A MATRIX. Acta Metallurgica Et Materialia, 42(5), 1509-1524. doi:10.1016/0956-7151(94)90361-1

Srichai, M. B., Dunand, D. C., & Mortensen, A. (1994). CALORIMETRY OF DEFORMED ALUMINUM REINFORCED WITH ALUMINA PARTICLES. Scripta Metallurgica Et Materialia, 30(12), 1509-1514. doi:10.1016/0956-716x(94)90299-2

1993

Dunand, D. C., & Derby, B. R. I. A. N. (1993). Creep and thermal cycling. Fundamentals of Metal Matrix Composites, 191-214. (link)

Dunand, D. C., Sommer, J. L., & Mortensen, A. (1993). Synthesis of bulk and reinforced. Metallurgical and Materials Transactions A, 24(10), 2161-2170.

Dunand, D. C., Sommer, J. L., & Mortensen, A. (1993). Reactive infiltration of nickel preforms with molten aluminum. In Processing and Fabrication of Advanced Materials for High Temperature Applications II (No. LMM-CONF-2007-016, pp. 635-646). (link)

Taylor, N., Dunand, D. C., & Mortensen, A. (1993). Initial stage hot pressing of monosized Ti and 90% Ti-10% TiC powders. Acta metallurgica et materialia, 41(3), 955-965.

Thomin, S. H., & Dunand, D. C. (1993). Oxidative Thermal Fatigue of SCS-6/Ti--6 Al--4 V Composites. Mechanisms and Mechanics of Composites Fracture, 221-234.

1992

1991

Dunand, D., & Mortensen, A. (1991). Thermal mismatch dislocations produced by large particles in a strain-hardening matrix. Materials Science and Engineering: A, 135, 179-184.

Dunand, D. C., & Mortensen, A. (1991). Reinforced silver chloride as a model material for the study of dislocations in metal matrix composites. Materials Science and Engineering: A, 144(1-2), 179-188.

Dunand, D. C., & Mortensen, A. (1991). Dislocation emission at fibers—I. Theory of longitudinal punching by thermal stresses. Acta metallurgica et materialia, 39(7), 1405-1416.

Dunand, D. C., & Mortensen, A. (1991). Dislocation emission at fibers—II. Experiments and microstructure of thermal punching. Acta metallurgica et materialia, 39(7), 1417-1429.

Dunand, D. C., & Mortensen, A. (1991). On the relaxation of a mismatching spheroid by prismatic loop punching. Scripta metallurgica et materialia, 25(4), 761-766.

Dunand, D. C., & Mortensen, A. (1991). Relaxed configuration of a row of punched prismatic dislocation loops. Scripta metallurgica et materialia, 25(3), 607-612.

Dunand, D. C., & Mortensen, A. (1991). On plastic relaxation of thermal stresses in reinforced metals. Acta metallurgica et materialia, 39(2), 127-139.

Li, Q., Dunand, D. C., Mortensen, A., & Cornie, J. A. (1991). Interface structure in infiltrated composites of aluminum reinforced with alumina-silica fiber preforms. Metallurgical Transactions A, 22(5), 1126-1128.

Review Articles


De Luca A., Dunand D.C., Seidman D.N. (2018) Scandium-Enriched Nanoprecipitates in Aluminum Providing Enhanced Coarsening and Creep Resistance. In: Martin O. (eds) Light Metals 2018. TMS 2018. The Minerals, Metals & Materials Series. Springer, Cham

Scotti, K. L., & Dunand, D. C. (2018). Freeze Casting–A Review of Processing, Microstructure and Properties via the Open Data Repository, FreezeCasting. net. Progress in Materials Science.

Colombo, P., Dunand, D. C. & Kumar, V. (2013). Porous materials: Less is more. Journal of Materials Research, 28(17), 2187-2190.

Robertson, I. M., Schuh, C. A., Vetrano, J. S., Browning, N. D., Field, D. P., Jensen, D. J., ... & Kabius, B. (2011). Towards an integrated materials characterization toolbox. Journal of Materials Research, 26(11), 1341-1383.

Bansiddhi, A., Sargeant, T. D., Stupp, S. I., & Dunand, D. C. (2008). Porous NiTi for bone implants: a review. Acta biomaterialia, 4(4), 773-782.

Brothers, A. H., & Dunand, D. C. (2007). Porous and foamed amorphous metals. Mrs Bulletin, 32(8), 639-643.

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2006). Criteria for developing castable, creep-resistant aluminum-based alloys–A review. Zeitschrift für Metallkunde, 97(3), 246-265.

Brothers, A. H., & Dunand, D. C. (2005). Plasticity and damage in cellular amorphous metals. Acta Materialia, 53(16), 4427-4440.

Dunand, D. C. (2004). Processing of titanium foams. Advanced Engineering Materials, 6(6), 369-376. doi:10.1002/adem.200405576

Dunand, D. C. (1994b). A REVIEW OF REACTIVE SYNTHESIS OF ALUMINIDE INTERMETALLICS. Warrendale: Minerals, Metals & Materials Soc.

Patents

2017

Huskamp, C. S., Booth-Morrison, C., Dunand, D. C., Seidman, D. N., Boileau, J. M., & Ghaffari, B. "Aluminum alloy with additions of scandium, zirconium and erbium." U.S. Patent No. 9,551,050. 24 Jan. 2017.[link]

2016

Vo, Nhon Q., David N. Seidman, and David C. Dunand. "Aluminum superalloys for use in high temperature applications." U.S. Patent No. 9,453,272. 27 Sep. 2016.[link]

Huskamp, C. S., Booth-Morrison, C., Dunand, D. C., Seidman, D. N., Boileau, J. M., & Ghaffari, B. (2016). "Aluminum Alloy with Additions of Scandium, Zirconium and Erbium." U.S. Patent Application No. 15/277,052.[link]

Mullner P, Dunand DC, Kucza NJ, Zheng P, inventors; Boise State University, assignee. Actuation via magnetic torque driven deformation. United States patent application US 15/068,237. 2016 Mar 11.[link]

Shah, Ramille N., Adam E. Jakus, and David C. Dunand. "Methods for fabricating three-dimensional metallic objects via additive manufacturing using metal oxide pastes." U.S. Patent No. 9,327,448. 3 May 2016.[link]

2015

Le, Brian V., Dunand, DC., McVary, KT., and Colombo, A. "Penile prosthesis." U.S. Patent No. 9,204,966. 8 Dec. 2015.[link]

2013

Mullner, Peter, et al. "Polycrystalline foams exhibiting giant magnetic-field-induced deformation and methods of making and using same." U.S. Patent No. 8,586,194. 19 Nov. 2013.[link]

2011

Mullner, P., Chmielus, M., Dunand, D. C., & Boonyongmaneerat, Y. (2011). "Magnetic material with large magnetic-field-induced deformation." U.S. Patent No. 7,964,290. Washington, DC: U.S. Patent and Trademark Office.[link]

2010

Dunand, David C., and Ampika Bansiddhi. "Method of making metallic foams and foams produced." U.S. Patent Application No. 12/590,992.[link]

2009

Dunand, David. "Magnetic Material with Large Magnetic-Field-Induced Deformation." (2009).[link]

2006

Dunand, D. (2006). Superconducting Mg-MgB2 and Related Metal Composites and Methods of Preparation (Patent No. 6995119.)[link]

2003

Dunand, David C. "Superconducting Mg-MgB2 and related metal composites and methods of preparation." U.S. Patent No. 6,630,427. 7 Oct. 2003.[link]

2002

Dunand, David C., and Peter Zwigl. "Chemically induced plastic deformation." U.S. Patent No. 6,355,120. 12 Mar. 2002.[link]

2001

Dunand, David C., and Christopher Schuh. "Densification via thermal treatment." U.S. Patent No. 6,315,838. 13 Nov. 2001.[link]

2000

Dunand, David C., and Peter Zwigl. "Chemically induced superplastic deformation." U.S. Patent No. 6,042,661. 28 Mar. 2000.[link]

Holzer, Hermann, and David C. Dunand. "Minimal thermal expansion, high thermal conductivity metal-ceramic matrix composite." U.S. Patent No. 6,132,676. 17 Oct. 2000.[link]

1995

Dunand, David C., and Cynthia M. Bedell. "Method for enhancing superplasticity in composites." U.S. Patent No. 5,413,649. 9 May 1995.[link]

1994

Mortensen, Andreas, and David C. Dunand. "Method for producing articles by reactive infiltration." U.S. Patent No. 5,366,686. 22 Nov. 1994.[link]

Edited Books


Lefebvre L.P., Banhart, J., & Dunand, D. C. (2008). MetFoam 2007: Porous Metals and Metallic Foams: Proceedings of the Fifth International Conference on Porous Metals and Metallic Foams, September 5-7, 2007, Montreal Canada. DEStech Publications, Inc.

Sanders, D. G., & Dunand, D. C. (2001). First and Second International Symposia on Superplasticity and Superplastic Forming Technology.

Chung, Y. W., Dunand, D. C., Liaw, P. K., & Olson, G. B. (1999). Advanced materials for the 21st century: The 1999 Julia R. Weertman symposium. [link]

Book Chapters


D.C. Dunand, B. Derby, Creep and Thermal Cycling, Suresh, S. (Ed.). (2013). Fundamentals of metal-matrix composites. Elsevier. [link]

D.C. Dunand, Metal Matrix Composites: High-Temperature Behavior, Bloor, D., & Cahn, R. W. (1994). The encyclopedia of advanced materials. Pergamon. [link]

Calhoun, R.B. & D.C. Dunand, Dislocations in Metal Matrix Composites, Gergely, V., & Degischer, H. P. (2000). Comprehensive Composite Materials, Vol. 3: Metal Matrix Composites, ed. TW Clyne.